The new Baxi 200 is a new addition to the Baxi family, available exclusively from independent merchants.
The Baxi 200 packs the latest boiler technology into a compact and lightweight design. With outputs of 24 and 28kW, the Baxi 200 is powerful enough to meet the heating and hot water demands of most homes but small enough to be installed into a standard kitchen cupboard - all of which is protected by a three year parts and labour warranty for complete peace of mind.
*Available until 31st December 2016. Subject to registration and an annual service. Terms and conditions apply.
A: Boiler width = 395mm
B: Boiler height = 700mm
C: Boiler depth = 279mm
D: Side clearance = 5mm
E: Upper clearance = 178mm
F: Lower clearance = 200mm
G: Front clearance = 6mm in operation, 450mm for servicing
|Baxi 200 Combi||224 Combi||228 Combi|
|Concealed User Controls||No||No|
|Operating mode selector switch with reset||Yes||Yes|
|User adjustable DHW temperature||Range - 35° to 60° (±5ºC)||Yes||Yes|
|User adjustable CH temperature||Range - 25° to 80° (±5ºC)||Yes||Yes|
|Temp/status/fault diagnosis display||LCD display||LCD display|
|Integral 24 hour mechanical timer combi||Optional||Optional|
|Plug-In 24 hour mechanical timer combi||Optional||Optional|
|Plug-In receiver 7 day RF thermostat-combi||Optional||Optional|
|Single channel wired timer||Optional||Optional|
|Baxi 200 and 400 stand off kit (7659335)||Optional||Optional|
|Multifit filling loop (2498221)||Optional||Optional|
|SAP 2009 Annual Efficiency (PCDB/SEDBUK)||%||89||89|
|ErP Product Information|
|Sound Power Level, Indoors||LWA dB||48||50|
|Space Heating Efficiency Class||A||A|
|Water Heating Declared Load Profile||XL||XL|
|Water Heating Efficiency Class||A||A|
|Heat Input CH||kW max gross (QnHs)||22.87||27.42|
|kW min gross (QnHs)||5.44||5.44|
|Heat Output CH (non condensing)||kW (Pn)||20||20|
|Heat Output CH (condensing)||kW max (PnC)||21.8||21.8|
|kW min (PnC)||5.2||5.2|
|Gas supply pipe size||(mm)||22||22|
|Inlet supply pressure (natural gas)||mbar (nominal)||20||20|
|Maximum gas rate (natural gas after 10 mins)||m3/hr||2.61||3.06|
|Mechanical and hydraulic|
|Heat input domestic hot water (DHW)||kW max gross (QnwHs)||27.4||32.1|
|Heat output domestic hot water||kW max||24||28|
|Maximum DHW flow rate (Delta T @ 35ºC max)||l/min||9.8||11.5|
|Minimum DHW flow rate required||l/min||2.0||2.0|
|Minimum operating DHW pressure required||bar||0.15||0.15|
|Maximum DHW system pressure||bar||8||8|
|Safety discharge pressure||bar||3.0||3.0|
|Compartment ventilation required||No||No|
|Flow / return pipe size||(mm)||22||22|
|Integral expansion vessel||Size (litres)||7||7|
|CH system inhibitor required||Yes||Yes|
|Condensate discharge pipe size||(mm)||21.5||21.5|
|Permanent live required||Yes||Yes|
|Electrical power cable required||core||3 x 0.75||3 x 0.75|
|Power consumption when firing||Watts||84||94|
|External fuse rating||Amps||3||3|
|Internal fuse rating - Connection board||Amps||0.5||0.5|
|Internal fuse rating - Man PCB board||Amps||1.6||1.6|
|Boiler IP rating (electrical protection) without integral timer fitted||Approval category||IPX5D||IPX5D|
|Circulating pump exercise feature||Yes||Yes|
|Integral 'boiler only' frost thermostat||Yes||Yes|
|Concentric flue system|
|Standard telescopic concentric flue||Length in mm||315-500||315-500|
|Horizontal concentric (60/100 mm)||Max equivalent length (m)||10||10|
|Reduction per 135° bend (m)||0.5||0.5|
|Reduction per 93° bend (m)||1||1|
|Horizontal concentric (80/125mm)||Max equivalent length||20||20|
|Installer lift weight (boiler)||Max (kg)||26||26|
|Gross packaged boiler weight||(kg)||30||30|
Additional heating and hot water accessories can improve the overall efficiency and performance of your heating system. This could reduce your fuel consumption and your energy bills.
For more information on any of the below accessories please speak to your installer as they will be able to advise you on the controls that are right for you.
For more information on the Baxi 200 accessories, click here
We don't sell our products directly to consumers which is why our prices aren't on our website.
We have Gas Safe Registered installers all over the UK who will be able to give you a quote for the installation of your new boiler. Simply enter a few details into our Find an Installer tool and we'll contact them on your behalf. The installer will get in touch to arrange a site survey and give you a competitive, no obligation quote.
For more information about combi boilers, please use the links below:
We offer free product training at our training centres across the UK for installers who want to get hands-on with Baxi boilers.
From construction and installation to functions and features, our expert trainers will give you a complete understanding of working with Baxi boilers.